Huawei, ZTE, Nokia, Alcatel Lucent, Fiberhome Network Hardware Store

Description

CE5810-24T4S-EI Overview

CE5810-24T4S-El switch comes with 24-Port GE RJ45, 4-port 10GE SFP+, without fan and power module. It is one of the Huawei Cloud Engine CE5800 series switches.

The Huawei Cloud Engine CE580O series switches are next-generation, high-density Gigabit Ethernet switches designed for data centers and high-end campus networks. The hardware has an advanced architectural design with the industry’s highest density of GE access ports. The CE5800 is also the first Gigabit Ethernet access switch to provide 40 GE uplink ports.

 

CE5810-24T4S-EI quick spec

24-Port GE RJ45

4-port 10GE SFP+

Switching capacity: 128 Gbit/s

Forwarding performance: 96 Mpps

 

CE5810-24T4S-EI appearance and structure

1	Power supply slot 1 Applicable power modules: 150 W AC power module (PAC-150WA) 350 W DC power module
2	Power supply slot 2 Applicable power modules: 150 W AC power module (PAC-150WA) 350 W DC power module
3	Fan slot 1 Applicable fan modules: FAN-40SB series fan modules
4	Fan slot 2 Applicable fan modules: FAN-40SB series fan modules
5	Console port
6	ETH management port (RJ45)
7	Barcode label
8	USB port
9	Twenty-four 10/100/1000BASE-T Ethernet electrical ports
10	Four 10GE SFP+ Ethernet optical ports Applicable modules and cables: 10GE optical module GE optical module GE copper module (only works at 1000 Mbit/s) SFP+ AOC cable SFP+ high-speed cable
11	Three port-side mounting holes for mounting brackets
12	Four power-supply-side mounting holes for mounting brackets
13	Ground screw

Item		CE5810-24T4S-EI
Technical specifications	Processor	1.2 GHz, dual-core
	DRAM Memory	2 GB
	NOR Flash	16 MB
	NAND Flash	512 MB
Stack	Service port supporting the stack function	10GE optical ports
Certification		Safety standards compliance
		EMC standards compliance
		Environmental standards compliance
Physical specifications		Dimensions (W x D x H): 442.0 mm x 420.0 mm x 43.6 mm (17.4 in. x 16.5 in. x 1.72 in.)
		Weight (with two power modules and two fan modules, calculated based on the heaviest model if multiple models are supported): 8.0 kg (17.64 lb)
Environment parameters	Temperature	Operating temperature: 0°C to 40°C (32°F to 104°F) at altitude of 0-1800 m (0-5906 ft.). Storage temperature: -40°C to +70°C
	Relative humidity	5% RH to 95% RH, noncondensing
	Altitude	< 5000 m (16404 ft.)
	Noise (sound pressure, 27°C)	Back-to-front airflow: < 43 dBA
		Front-to-back airflow: < 47 dBA
Power specifications	Power source type	AC/DC
	AC power input	Rated input voltage range: 100 V AC to 240 V AC, 50/60 Hz
		Maximum input voltage range: 90 V AC to 290 V AC, 47 Hz to 63 Hz
	DC power input	Rated voltage range: -48 V DC to -60 V DC
		Maximum voltage range: -38.4 V DC to -72 V DC
	High-voltage DC power input	Not supported
	Rated input current	150 W AC power (PAC-150WA): 2.5 A (100 V AC to 240 V AC)
		350 W DC power (PDC-350WA series): 11 A (-48 V DC to -60 V DC)
Chassis power consumption	Maximum power consumption	68 W
	Typical power consumption	58 W (100% throughput, 3 m Ethernet cables on 24 ports, SFP+ cables on 4 ports, double power modules)
Chassis heat dissipation	Maximum heat dissipation	232 BTU/hr
	Typical heat dissipation	198 BTU/hr (100% throughput, 3 m Ethernet cables on 24 ports, SFP+ cables on 4 ports, double power modules)
Surge protection		Ethernet electrical ports: 2 kV in common mode
		Power module:
		AC: 6 kV in common mode and 6 kV in differential mode
		DC: 4 kV in common mode and 2 kV in differential mode
Heat dissipation	Heat dissipation mode	Air cooling
	Airflow	Front-to-back or back-to-front, depending on the fan modules and power modules
Reliability and availability	Power module backup	1+1 backup
	Fan module backup	1+1 backup
	Hot swap	Supported by all power modules and fan modules
	Mean time between failures (MTBF)	70.3 years
	Mean time to repair (MTtr)	1.75 hours
	Availability	0.999997153