CE6881-48T6CQ
CE6881-48T6CQ Huawei CE6800 switch supports 48*10GBASE-T, 6*100GE QSFP28
- Description
- DATASHEET
- Reviews (0)
Description
CE6881-48T6CQ overview
CE6881-48T6CQ Huawei CE6800 switch supports 48*10GBASE-T, 6*100GE QSFP28
CE6881-48T6CQ appearance
CE6881-48T6CQ application
Item | Details |
---|---|
Description | CE6881-48T6CQ switch (48*10GE RJ45, 6*100GE QSFP28, without fan and power modules) |
Part Number | 02353GLB |
Model | CE6881-48T6CQ |
First supported version | V200R020C00 |
Other part numbers | 02353GLC (CE6881-48T6CQ-B switch(48*10GE RJ45,6*100GE QSFP28,2*AC power modules,4*fan modules,port-side intake))
02353GLD (CE6881-48T6CQ-F switch (48*10GE RJ45, 6*100GE QSFP28, 2*AC power modules, 4*fan modules, port-side exhaust)) |
Short Name | CE6881 |
Item | CE6881-48T6CQ |
Installation Type | Cabinet Installation |
CPU | 4-core, 1.4 GHZ |
Memory | DRAM: 4 GB |
NOR Flash | 64 MB |
NAND Flash | 4 GB |
USB | Supported |
Power supply mode |
|
Console port | RJ45 |
Downlink Service interface | 48*10GE RJ45 (Only full-duplex is supported) |
Uplink Service interface | 6*100GE QSFP28 (Note: 1. Each 100G QSFP28 port can be configured to work at 40 Gbit/s. 2. A 100G QSFP28 port cannot be split into four 25GE or 10GE ports. 3. 100GE and 40GE 1/3/5 m copper cables are supported, but auto-negotiation of copper cables is not supported. 100GE and 40GE copper cables can only be used on stack interfaces and M-LAG peer-link interfaces. 100G 3/5 m copper cables support only RS FEC. After the non-RS FEC mode is configured, the port enters the error-down state.) |
Service port supporting the stack function | 10GE electrical ports and 100GE optical ports |
RTC | Supported |
Typical power consumption [W] |
|
Typical heat dissipation [BTU/hour] |
|
Static power consumption [W] | 235 W |
Static heat dissipation [BTU/hour] | 801 BTU/hour |
Maximum power consumption [W] | 452 W |
Maximum heat dissipation | 1542 |
Number of power modules | 2 |
Redundant power supply | 1+1 backup |
Rated input voltage [V] |
|
Input voltage range [V] |
|
Maximum input current [A] |
|
Rated output power [W] |
|
Certification |
|
Power supply surge protection [kV] |
|
Types of fans | Pluggable |
Number of fans | 4 |
Redundant fans | The device supports 3+1 backup of fan modules that work in hot standby mode. The system can operate properly for a short time after a single fan module fails. You are advised to replace the faulty fan module immediately. |
Heat dissipation mode | Air cooling |
Airflow direction | Front-to-back or back-to-front, depending on the fan modules and power modules. |
Availability | 0.9999953209 |
MTBF [year] | 48.16 years |
MTTR [hour] | 1.78 hours |
Noise at normal temperature (27°C, sound pressure) [dB(A)] |
|
Noise at high temperature (40°C, sound pressure) [dB(A)] |
|
Long-term operating altitude [m (ft.)] | ≤ 5000 m (16404 ft.) |
Long-term operating relative humidity [RH] | 5% RH to 95% RH, noncondensing |
Long-term operating temperature [°C (°F)] | 0°C to 40°C (32°F to 104°F) at an altitude of 0–1800 m (0–5906 ft.) |
Storage altitude [m (ft.)] | < 5000 m (16404 ft.) |
Storage relative humidity [RH] | 5% RH to 95% RH, noncondensing |
Storage temperature [°C (°F)] | -40°C to +70°C (-40°F to +158°F) |
Dimensions with packaging (H x W x D) [mm (in.)] | 175 mm x 650 mm x 550 mm (6.9 in. x 25.6 in. x 21.7 in.) |
Dimensions without packaging (H x W x D) [mm (in.)] |
|
Weight without packaging (base configuration) [kg (lb)] | 6.6 kg (14.6 lb) (excluding optical modules, power modules, and fan modules) |
Weight without packaging (full configuration) [kg (lb)] | 8.9 kg (19.6 lb) (including AC power modules and fan modules, excluding optical modules, calculated based on the heaviest model if multiple models are supported) |
Weight with packaging (base configuration) [kg (lb)] | 10.4 kg (22.93 lb) |
Weight with packaging (full configuration) [kg (lb)] | 12.3 kg (27.12 lb) |
Reviews
There are no reviews yet.