SSN3SL16A
Huawei OSN7500 SSN3SL16A 1xSTM-16 optical interface board
- Description
- DATASHEET
- Reviews (0)
Description
SSN3SL16A overview
Huawei OSN7500 SSN3SL16A 1xSTM-16 optical interface board. The SL16A is a line board. The SL16A can be used on the OptiX OSN equipment series to transmit and receive STM-16 optical signals. The SL16A converts the received optical signals into electrical signals and sends the electrical signals to the cross-connect side. In addition, the SL16A converts the electrical signals sent from the cross-connect side into optical signals and transmits the optical signals.
Version Description
The SL16A is available in the following functional versions: N3, N2, and N1.
Item |
Description |
---|---|
Functional versions | The SL16A is available in the following functional versions: N3, N2, and N1. The N1SL16A and N2SL16A are discontinued. |
Differences |
|
Substitution |
|
Valid Slots
The SL16A must be installed in a valid slot in the subrack. Otherwise, the SL16A fails to work normally.
The slots valid for the SL16A vary with the cross-connect capacity of the subrack. The slots valid for the SL16A are as follows:
- When the cross-connect capacity is 360 Gbit/s, the SL16A can be installed in slots 1–8, 11–18, and 26–31.
Relationship between the feature code of the SL16A and the type of optical interface
Board |
Feature Code |
Type of Optical Interface |
---|---|---|
SSN1SL16A01, SSN2SL16A01, SSN3SL16A01 | 01 | I-16 |
SSN1SL16A02, SSN2SL16A02, SSN3SL16A02 | 02 | S-16.1 |
SSN1SL16A03, SSN2SL16A03, SSN3SL16A03 | 03 | L-16.1 |
SSN1SL16A04, SSN2SL16A04, SSN3SL16A04 | 04 | L-16.2 |
SSN3SL16A06 | 06 | I-16 |
SSN3SL16A07 | 07 | S-16.1 |
SSN3SL16A08 | 08 | L-16.1 |
SSN3SL16A09 | 09 | L-16.2 |
SSN3SL16A10 | 10 | U-16.2 |
SSN3SL16A11 | 11 | U-16.2 |
SSN3SL16A14 | 14 | S-16.1 |
SSN3SL16A15 | 15 | L-16.1 |
SSN3SL16A13 | 13 | I-16 |
SSN3SL16A16 | 16 | L-16.2 |
SSN3SL16A17 | 17 | U-16.2 |
Specifications of the ports of the SL16A
Port type |
Description |
---|---|
I-16 | 2 km STM-16 two-fiber bidrectional optical interfaces |
S-16.1 | 15 km STM-16 two-fiber bidrectional optical interfaces |
L-16.1 | 40 km STM-16 two-fiber bidrectional optical interfaces |
L-16.2 | 80 km STM-16 two-fiber bidrectional optical interfaces |
U-16.2Je (BA+PA) | 170 km STM-16 two-fiber bidrectional optical interfaces
NOTE: Only N3SL16A board supports U-16.2Je (BA+PA). |
Item |
SSN3SL16A |
---|---|
Basic functions | Transmits and receives 1xSTM-16 optical signals. |
Specifications of the optical interface | Supports different types of standard optical interfaces, namely, the I-16, S-16.1, L-16.1, and L-16.2. The characteristics of the optical interfaces comply with ITU-T G.957 and ITU-T G.692.
The N3SL16A supports U-16.2Je (with the BA and pre-amplifier (PA)). The characteristics of the optical interfaces of the U-16.2Je (with the BA and PA) comply with the standards defined by Huawei. U-16.2Je is compatible with U-16.2. The N3SL16A supports the CWDM and DWDM colored optical interfaces. The optical interface uses the LC connector. The CWDM optical interface supports the transmission distance of 80 km, and the DWDM optical interface supports the transmission distance of 120 km. |
Specifications of the optical module |
|
Service processing |
|
Overhead processing |
|
Alarms and performance events | Reports various alarms and performance events, which facilitates the management and maintenance of the equipment. |
Specifications of the REG |
|
Protection schemes |
|
Maintenance features |
|
Reviews
There are no reviews yet.