SSN3SLH41
Huawei OSN7500 series SSN3SLH41 16xSTM-1/STM-14 Optical Interface Board
- Description
- DATASHEET
- Reviews (0)
Description
SSN3SLH41 overview
The SLH41 is a line board. The SLH41 can be used on the OptiX OSN equipment series to transmit and receive STM-1/STM-4 optical signals. The SLH41 converts the received optical signals into electrical signals and sends the electrical signals to the cross-connect side. In addition, the SLH41 converts the electrical signals sent from the cross-connect side into optical signals and transmits the optical signals.
Valid Slots
The SLH41 must be installed in a valid slot on the subrack. Otherwise, the SLH41 fails to work normally.
The slots valid for the SLH41 vary with the cross-connect capacity of the equipment. The slots valid for the SLH41 are as follows:
When the cross-connect capacity is 360 Gbit/s, the SLH41 can be installed in any of slots 1-8, slots 11-18, and slots 26-31.
Relationship between the feature code of the SLH41 and the type of optical interface
Board |
Feature Code |
Type of Optical Interface |
---|---|---|
SSN3SLH4101 | 01 | 12xS-1.1, 4xS-4.1 |
SSN3SLH4102 | 02 | 8xS-1.1, 8xS-4.1 |
SSN3SLH4103 | 03 | 16xS-1.1 |
SSN3SLH4104 | 04 | 4xL-1.1, 12xS-4.1 |
SSN3SLH4105 | 05 | 16×S-4.1 |
SSN3SLH4106 | 06 | 16xL-1.2 |
SSN3SLH4107 | 07 | 16×L-4.2 |
Specifications of the ports
Port type |
Description |
---|---|
S-1.1 | 15 km STM-1 two-fiber bidrectional optical interfaces |
L-1.1 | 40 km STM-1 two-fiber bidrectional optical interfaces |
L-1.2 | 80 km STM-1 two-fiber bidrectional optical interfaces |
S-4.1 | 15 km STM-4 two-fiber bidrectional optical interfaces |
L-4.2 | 80 km STM-4 two-fiber bidrectional optical interfaces |
S-1.1 | 15 km STM-1 single-fiber bidrectional optical interfaces |
L-4.1 | 40 km STM-4 single-fiber bidrectional optical interfaces |
80 km CWDM | 80 km CWDM optical interfaces |
120 km DWDM | 120 km DWDM optical interfaces |
Item |
SSN3SLH41 |
---|---|
Basic functions | Transmits and receives 16xSTM-1/STM-4 optical signals. |
Specifications of the optical interface | The STM-1/STM-4 optical module can be used, which supports the adaptive modulation (AM) technology.
Supports the CWDM and DWDM colored optical interfaces. The optical interface uses the LC connector. The CWDM optical interface supports the transmission distance of 80 km, and the DWDM optical interface supports the transmission distance of 120 km. |
Specifications of the optical module |
|
Service processing |
|
Overhead processing |
|
Alarms and performance events | Reports various alarms and performance events, which facilitates the management and maintenance of the equipment. |
Protection schemes |
|
Maintenance features |
|
Reviews
There are no reviews yet.