- Description
- DATASHEET
- Comparison
- Reviews (0)
Description
S12710 overview
HUAWEI S12700 series agile switches (S12700 for short) are designed for next-generation campus networks. Using a fully programmable switching architecture, the S12700 allows fast, flexible function customization and supports a smooth evolution to Software-Defined Networking (SDN). The S12700 uses a Huawei Ethernet Network Processor (ENP) and provides a native Wireless Access Controller (AC) to help build a wired and wireless converged network. Its Unified User Management capabilities deliver unified user and service management, and Huawei’s Packet Conservation Algorithm for Internet (iPCA) supports hop-by-hop monitoring of any service flows, helping manage services in a more refined way.
The S12700 runs the Huawei Versatile Routing Platform (VRP), which provides high-performance L2/L3 switching services and rich network services, such as Multiprotocol Label Switching (MPLS) VPN, hardware IPv6, desktop cloud, and video conferencing. In addition, the S12700 series uses a variety of reliability technologies, including non-stop forwarding, hardware Eth-OAM/BFD, ring network protection, and Cluster Switch System Generation2 (CSS2) — a switch fabric hardware clustering technology that allows 1+N backup of Main Processing Units (MPUs). These technologies help improve productivity and maximize network operation time, reducing Total Cost of Ownership (TCO).
S12710 appearance and structure
The S12710 chassis is 15 U high (1 U = 44.45 mm). When the chassis has no cable management frame installed, the dimensions (H x W x D) are 663.9 mm x 442 mm x 517.4 mm. When the chassis has cable management frames installed, the dimensions (H x W x D) are 663.9 mm x 442 mm x 585 mm.
S12710 chassis structure (front view):
1. Ten LPUs, including:
|
2. Two MPUs | 3. A pair of mounting brackets
NOTE: The mounting brackets are used to secure the chassis in the cabinet. |
| 4. Four power modules | 5. Two CMUs | 6. Front ESD jack
NOTE: The ground terminal of an ESD wrist strap can be inserted into this jack. The ESD wrist strap can provide ESD protection when the chassis is reliably grounded. |
| 7. Cable management frames
NOTE: Cable management frames are used to route cables. |
8. Two Switch Fabric Units |
| Item | S12710 |
| Number of LPU slots | 10 |
| Number of MPU slots | 2 |
| Number of SFU slots | 2 |
| Number of fan slots | 4 |
| Number of power module slots | 4 |
| Maximum port density |
|
| Installation | In an N66E or N68E cabinet, one cabinet for one chassis |
| Cluster switch system (CSS) | Supports CSS card clustering (CSS cards integrated on main control unit and SFU, with fixed CSS ports on panels) |
| Maximum power consumption (fully configured)
NOTE: The heat dissipation value of a chassis equals the current power consumption of the chassis. |
4644 W |
| Power specifications |
|
| Dimensions (H x W x D, without rack-mounting brackets) |
|
| Weight (empty/fully configured) | 28.6 kg/98.4 kg (63.05 lb/216.93 lb) |
| Reliability and availability |
NOTE: The preceding values are calculated based on the typical configuration of the product. The actual values will vary depending on the modules installed on the product. |
| Environment specifications |
|
| Noise under normal temperature (sound power) | ≤ 75.7 dB(A) |
| Certification |
|
| Part number | 02114860 |
| Chassis | Model Description |
| S12704 | Supports double Main Processing Units (MPUs), four Line Processing Units (LPUs), two Switch Fabric Units (SFUs), and AC or DC power modules in N+N/N+1/N+0 (no redundancy) backup mode. |
| S12708 | Supports double MPUs, eight LPUs, four SFUs, and AC or DC power modules in N+N/N+1/N+0 (no redundancy) backup mode. |
| S12710 | Supports double MPUs, ten LPUs, two SFUs, and AC or DC power modules in N+N/N+1/N+0 (no redundancy) backup mode. |
| S12712 | Supports double MPUs, twelve LPUs, four SFUs, and AC or DC power modules in N+N/N+1/N+0 (no redundancy) backup mode. |
Reviews
There are no reviews yet.