|
Basic functions
|
Receives/Transmits and processes 4*FE or 4*GE services.
NOTE:
If created as the EGS4 or EGS4D board on the NMS, the board supports EoS application.
|
|
Port types
|
|
|
Port characteristics
|
Working modes
|
GE electrical port: auto-negotiation, 1000M full-duplex, 100M full-duplex, and 10M full-duplex
GE optical port: auto-negotiation and 1000M full-duplex
FE optical port: 100M full-duplex
|
|
Traffic control at ports
|
- Supports auto-negotiation flow control (supported only by GE ports).
- Supports non-auto-negotiation flow control.
|
|
Query/Setting of port status
|
Supported
|
|
Query of port types
|
Supported
|
|
Service categories
|
EPL service
|
Supports PORT-based transparent transmission.
|
|
EVPL service
|
- Supports PORT-shared EVPL services.
- Supports VCTRUNK-shared EVPL services.
- The services are isolated by VLAN tags.
- The services are isolated by QinQ tags.
|
|
EPLAN service
|
- Supports the EPLAN services that are based on the IEEE 802.1d MAC bridge.
- Supports a maximum of 16 VBs. The maximum number of logical ports for each VB is 68.
- Supports the self-learning of the source MAC address. The capacity of the MAC address table is 16K. The aging time of the MAC address can be set and queried.
- Supports the configuration of static MAC routes.
- Supports the query of dynamic MAC addresses.
- Supports the blacklist that can contain 512 records and also the static MAC address table that can contain 512 records.
NOTE:
EGS4 boards support SVL modes. Ensure that all bridges on a board apply the same learning mode.
|
|
EVPLAN service
|
- Supports the EVPLAN services that are based on the IEEE 802.1q virtual bridge and IEEE 802.1ad provider bridge.
- Supports data isolation based on VB+VLAN.
- Supports the setting of a maximum of 4095 VLAN filtering tables.
NOTE:
EGS4 boards support SVL and IVL modes. Ensure that all bridges on a board apply the same learning mode.
|
|
Service specifications
|
Formats of Ethernet data frames
|
- Supports IEEE 802.3.
- Supports Ethernet II.
- Supports IEEE 802.1 q/p.
|
|
Frame length range
|
- Supports the setting of the frame length to a value ranging from 1518 bytes to 9600 bytes.
- Supports a jumbo frame with a maximum length of 9600 bytes.
|
|
Bound bandwidth
|
16 x VC-4, or 48 x VC-3, or 252 x VC-12
|
|
Concatenation granularities
|
VC-12, VC-3, VC-4, VC-12-Xv (X ≤ 63), VC-3-Xv (X ≤ 24), and VC-4-Xv (X ≤ 8).
|
|
Encapsulation formats
|
- Supports HDLC, LAPS, GFP-F.
|
|
MPLS technology
|
Not supported
|
|
VLAN technology
|
Supports a total number of 4094 VLANs, which comply with IEEE 802.1q/p.
|
|
Maximum uplink bandwidth
|
2.5 Gbit/s.
|
|
VCTRUNK specifications
|
64
Configuration principles are as follows:
- Supports a maximum of 16 VC-4s.
- When a lower-order channel is bound, VC-4 channels numbered 1 to 4 support the binding of VC-3 and VC-12 channels. VC-4 channels numbered 5 to 16 support the binding of VC-3 channels only.
|
|
Protection schemes
|
BPS
|
Not supported
|
|
PPS
|
Not supported
|
|
Distributed link aggregation group (DLAG)
|
- Supports static DLAGs.
- Supports non-load sharing DLAGs.
- Complies with IEEE 802.3ad and IEEE 802.1ax.
|
|
LAG
|
- Supports manual link aggregation and static link aggregation.
- Supports the load sharing mode and non-load sharing mode.
- Complies with IEEE 802.3ad and IEEE 802.1ax.
|
|
LCAS
|
Dynamically increases or decreases the bandwidth and protects the bandwidth in compliance with ITU-T G.7042.
|
|
LPT
|
Supports P2P LPT and P2MP LPT in compliance with Huawei proprietary protocol.
|
|
STP/RSTP
|
Supports the RSTP, which complies with IEEE 802.1w.
|
|
MSTP
|
Not supported
|
|
Synchronization
|
Physical Clock
|
Supported
NOTE:
SFP electrical modules do not support physical clock.
|
|
IEEE 1588v2
|
Not supported
|
|
Maintenance features
|
ETH-OAM
|
- Supports CC, LB tests, and LT tests in compliance with IEEE 802.1ag and OAM ping in compliance with Huawei proprietary protocol.
- Supports OAM auto-discovery, remote loopbacks, fault detection, and link performance detection in compliance with IEEE 802.3ah, and selfloop detection in compliance with Huawei proprietary protocol.
|
|
Test Frame
|
Supports test frames in GFP bearer mode.
|
|
Response to ping
|
Supported
|
|
Port mirroring
|
Supports ingress mirroring.
|
|
Loopback capability
|
- Supports inloops at the PHY layer of the Ethernet port.
- Supports inloops at the MAC layer of the Ethernet port.
- Supports outloops at the VC-4 level, VC-3 level and VC-12 level.
|
|
RMON
|
Supports RMON of the Ethernet performance of Ethernet ports and VCTRUNKs.
|
|
Warm resets
|
Supported
|
|
Cold resets
|
Supported
|
|
Alarms and performance events
|
Reports various alarms and performance events, which facilitates the management and maintenance of the equipment.
|
|
QoS
|
Traffic classification
|
Supports traffic classification based on PORT, PORT+VLAN, PORT+SVLAN, and PORT+VLAN+PRI.
|
|
Class of service (CoS)
|
Supports CoS types including simple, VLAN priority, DSCP, and IP TOS.
|
|
Committed access rate (CAR)
|
Supports the CAR, with the granularity of 64 kbit/s.
|
|
Shaping
|
Supports queue shaping on ports.
|
|
Queue scheduling policy
|
Supports strict priority (SP) and weighted fair queuing (WFQ).
|
|
Congestion avoidance
|
Supports random early detection (RED).
|
|
IGMP snooping
|
Protocol enabling
|
Supports protocol enabling in compliance with IGMPv1 and IGMPv2.
|
|
Port aging time
|
Supported
|
|
Fast leave
|
Supported
|
|
Discarding of unknown broadcast packets
|
Supported
|
|
Static broadcast entry
|
Not supported
|
|
Traffic control
|
Supports the port-based traffic control function that complies with IEEE 802.3x.
|
|
Traffic monitoring
|
EGS4 boards support port-based and VCTRUNK-based traffic monitoring.
|
|
SDH ASON
|
When working with TNZ5UXCMS, the board supports this function.
|
|
2M ASON
|
When working with TNZ5UXCMS, the board supports this function.
|
Reviews
There are no reviews yet.