S6730-H48X6C
Huawei S6730-H48X6C switch supports 48 10GE SFP+ ports, 6 40GE/100GE QSFP+ ports, 2 hot swappable AC/DC power supplies, 1 AC equipped
- Description
- DATASHEET
- Packing info
- Download
- Reviews (9)
Description
S6730-H48X6C overview
This Huawei switch comes with 48 10GE SFP+ ports, 6 40GE/100GE QSFP+ ports, 2 hot swappable AC/DC power supplies, which is one of the S6730 series switches.
Huawei CloudEngine S6730-H series switches offer 10GE, 25GE, 40GE, and 100GE port types, flexibly adapting to diversified network bandwidth requirements. They also support cloud management and implement cloud-managed network services throughout the full lifecycle from planning, deployment, monitoring, experience visibility, and fault rectification, all the way to network optimization, greatly simplifying network management.
Telecomate.com provides a full range of Huawei switches, optical modules, extension boards, if you have more demands, please contact [email protected].
S6730-H48X6C quick spec
48 10GE SFP+ ports
6 40GE/100GE QSFP28 ports
2 hot swappable AC/DC power supplies
S6730-H48X6C appearance and structure
1. Forty-eight 10GE SFP+ ports | 8. One PNP button |
2. Six 40GE/100GE QSFP28 optical ports
40GE QSFP+: QSFP-40G-eSR4 QSFP-40G-iSR4 QSFP-40G-eSDLC-PAM QSFP-40G-LR4 QSFP-40G-SDLC-PAM 100GE QSFP28: QSFP-100G-CWDM4 QSFP-100G-ER4-Lite QSFP28-100G-LR4 QSFP28-100G-PSM4 |
9. Fan module slot 1 |
3. Ground screw | 10. Fan module slot 2 |
4. SSD card slot | 11. Fan module slot 3 |
5. One console port | 12. Fan module slot 4 |
6. One ETH management port | 13. Power module slot 1 |
7. One USB port | 14. Power module slot 2 |
Item | S6730-H48X6C |
Memory (RAM) | 4 GB |
Flash | 2 GB in total. To view the available flash memory size, run the display version command. |
Mean time between failures (MTBF) | 56.87 years |
Mean time to repair (MTTR) | 2 hours |
Availability | > 0.99999 |
Service port surge protection | N/A |
Stack ports | Any 10GE SFP+ ports (a maximum of 16 physical ports) |
Any 40GE/100GE QSFP28 ports (a maximum of 6 physical ports) | |
RTC | Supported |
RPS | Not supported |
PoE | Not supported |
Rated voltage range | AC input: 100 V AC to 240 V AC, 50/60 Hz |
High-Voltage DC input: 240 V DC | |
DC input: -48 V DC to -60 V DC | |
Maximum voltage range | AC input: 90 V AC to 290 V AC, 45 Hz to 65 Hz |
High-Voltage DC input: 190 V DC to 290 V DC | |
DC input: -38.4 V DC to -72 V DC | |
Maximum power consumption (100% throughput, full speed of fans) | 291 W |
Typical power consumption (30% of traffic load, tested according to ATIS standard) | 165 W |
Operating temperature | -5°C to +45°C (23°F to 113°F) at an altitude of 0-1800 m (0-5906 ft.) |
NOTE: | |
When the altitude is 1800-5000 m (5906-16404 ft.), the highest operating temperature reduces by 1°C (1.8°F) every time the altitude increases by 220 m (722 ft.). | |
The switch cannot be started when the ambient temperature is lower than 0°C (32°F). | |
The operating temperature of the switch is -5°C to 40°C (23°F to 104°F) when it uses QSFP-100G-ER4 optical module. | |
Storage temperature | -40°C to +70°C (-40°F to +158°F) |
Noise under normal temperature (27°C, sound power) | < 65 dB(A) |
Relative humidity | 5% to 95%, noncondensing |
Operating altitude | 0-5000 m (0-16404 ft.) |
Certification | EMC certification |
Safety certification | |
Manufacturing certification | |
Part number | 02352FSF |
02353FWL | |
02352FSF-003 | |
02353FWL-003 | |
Power supply surge protection | Using AC power modules: ±6 kV in differential mode, ±6 kV in common mode |
Using DC power modules: ±2 kV in differential mode, ±4 kV in common mode | |
Dimensions (H x W x D) | Basic dimensions (excluding the parts protruding from the body): 43.6 mm x 442.0 mm x 420.0 mm (1.72 in. x 17.4 in. x 16.5 in.) |
Maximum dimensions (the depth is the distance from ports on the front panel to the handle on the rear panel): 43.6 mm x 442.0 mm x 446.0 mm (1.72 in. x 17.4 in. x 17.6 in.) | |
Weight (with packaging) | 9.2 kg (20.28 lb) |
Additional information
Weight | 19 kg |
---|---|
Dimensions | 71 × 55 × 17.5 cm |
Maria –
Surprised by the delivery time, I placed an order on monday this week and got it this morning!
Claudio –
QSFP28 port is 40GE by default, can support 100GE after activate one license.
Telecomate.com can provide the license.
Shelton –
Nice sales and fast delivery. They solved the license issue patiently. But this switch can not support PoE+.
Gomes –
This Huawei switch is very good, load 40G to 100G license to support 100G port.
Evgeniya –
I used S6730-H48X6C to replace of S6330-H48X6C,
Elijah –
I bought 100G license for S6730-H48X6C alone here, nice!
Yolanda Sanchez –
He comprado este switch para nuestro core red, nos da un buen rendimiento. Perfecto
Elizabeth –
I can buy only S6730-H48X6C 100G license from Telecomate.com.
Qadir –
Telecomate.com helps us load 100G RTU license into S6730-H48X6 before shipping, so great.